-
🧼 Thorough Vehicle Wash
Remove dirt, road grime, grease, and contaminants from the vehicle’s exterior.
-
🧽 Chemical & Iron Decontamination
Remove embedded contaminants such as iron particles, brake dust, tar, and other bonded debris.
-
👐 Clay Bar Treatment
Clay the paint to remove remaining surface contaminants and leave the paint smooth and clean.
-
✨ Paint Inspection
Inspect the paint under proper lighting to identify scratches, swirl marks, oxidation, and other imperfections.
-
🔧 Paint Correction
Polish the paint as needed to remove or reduce imperfections and restore gloss before coating.
-
🧴 Panel Prep / Surface Prep
Wipe down the entire vehicle with a panel-prep solution to remove polishing oils, waxes, and residues.
-
💎 Ceramic Coating Application
Apply the ceramic coating one section at a time using the manufacturer's recommended application method.
-
⏱️ Flash & Level the Coating
Allow the coating to properly flash, then carefully level and remove excess product to achieve an even finish.
-
🔍 Final Inspection
Check every panel for high spots, streaks, or missed areas and correct them before curing.
-
🌡️ Curing Process
Keep the vehicle protected from water, dirt, and contamination while the coating cures according to the product manufacturer's instructions.
-
💦 Final Result
Once properly cured, the coating provides a glossy finish, hydrophobic water behavior, easier maintenance, and an added layer of protection for the paint.
