CarPro Velvet Orange Peel Removal Pad - 5 1/4" 2pack

Product Description

• Foam Interlayer changed from 3/8" to 3/16"
• Redesigned foam interlayer for more effective orange peel removal
• Redesigned without holes for longer durability 

Features:

• Reduce Orange Peel and deep defects while simultaneously polishing paint
• Equivalent to 3000 grit sandpaper with out the dulling of paint and sanding haze
• Reduce Orange Peel without sanding
• Orange peel removal without the haze generated by sanding
• Polish the paint while removing the ridges of orange peel
• Less dust and clean up prior to finishing polish

 Directions:

• Attach to hook & loop backing plate with rotary polisher for best results.
• Apply a few drops of Scholl Concepts S3 Gold XXL to paint or pad according to your skills and preference
• Work a 2' x 2' section or larger to keep heat down as needed but remember the larger the area the more time it will take to level orange peel and defects.
• Begin working polish on low speed for a pass.
• Step up speed to approximately 1100 rpm (adjust as needed)
• With proper lighting observe the level of orange peel removal while you work noting precise surface contact without pressure to level ridges.
• After completing each section wipe off paint with soft microfiber towel
• Brush pad in direction of fibers to remove residue
• Apply a couple more drops of polish for next section
• Switch out pads as needed when cut has been compromised and set aside to clean by hand.

• Spray cleaning solution on face of pad.
• Brush with Pad cleaning brush
• Rinse face of pad.
• Allow to dry before next use